[[Binary repository]]
 
Trace: » Hello world ! in Python » Using the serial ports » Products previews » Hello world ! in PHP » WEB access » Using the FOXGM board » Compiling Linux Device Drivers » Create foxg20-script.bin u-Boot environment file » Using the SRF02 Ultrasonic range finder in I2C mode » Binary repository
Table of Contents

Binary repository

This page contains the links where find the ready-to-use binary images to create a bootable microSD for the FOX Board G20. Read this tutorial to know how to create a bootable microSD.

Factory default Debian distributions

NOTE New factory default Linux distribution

This version requires the new AcmeBoot loader: Learn more

Files to store in the first FAT16 partition:

  • Kernel image: uimage (MD5:1da57824b5bc580924ab6157a05182ab)

Files to store in the second EXT4 partition:

  • Rootfs contents: rootfs.tar.bz2 (MD5:b9f7292602aa1096b94e068c773208e8)

Config file used to generate the kernel image:

  • Kernel configuration file used .config (MD5:a214debccfd1232c398ec72c2a7323fc)
Changelog:

Kernel file
* Bootable with AcmeBoot loader utility
* Linux boot option built-in the uimage file (fox-script.bin is no longer required)
  mem=64M console=ttyS0,115200 noinitrd root=/dev/mmcblk0p2 rw rootwait init=/sbin/init

Rootfs
* requires an ext4 filesystem (etc/fstab) 
* apt-get update
* apt-get install tree
* apt-get clean

NOTE This is the default Linux distribution shipped up to 25 august 2010

Files to store in the first FAT16 partition:

  • Kernel image: uimage (MD5:ef1ef413162a74498ff953516c40209d)
  • u-Boot environment variables: foxg20-script.bin (MD5:4eb2e27a98b1bc0e57a3278490952393 )

Files to store in the second REISERFS partition:

  • Rootfs contents: rootfs.tar.bz2 (MD5:8942161f81551752e1b648c9b1bf776c)

Config file used to generate the kernel image:

  • Kernel configuration file used .config (MD5:7a25ba5f058f2ea2caad5c1108cbd701)

Other distributions

OpenWrt

Files to store in the first FAT16 patition:

Files to store in the second EXT2 partition:

Gentoo

Files to store in the first FAT16 patition:

Files to store in the second REISERFS partition:

Old files

 
dev/binary-repository.txt · Last modified: 2010/08/25 16:18 by tanzox
 
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki